VA-Standard filter head for pre- and post-filter cartridge
€23.80*
Content:
1 Stück
Available, delivery time: 3 - 5 Werktage
Product number:
1000065
EAN:
4260645520646
Manufacturer no.:
1000065
Weight:
0.09 kg
Length:
86 mm
Height:
85 mm
Width:
66 mm
Product information "VA-Standard filter head for pre- and post-filter cartridge"
VA-Standard-Cartridge System
In water filtration it is very important to use a reliable and robust water filter cartridge system. Often, the pre- and post-filters are the Achilles' heel of a water treatment system, its weak point. The filter cartridges have to withstand pressure peaks of up to 50 bar that can occur in the water pipe. The cartridge must not burst or even jump out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.
The VA-Standard - cartridges are sealed using a rotary welding process, which results in maximum strength. In addition, each cartridge has its own seals, which do not have to be laboriously cleaned, checked or replaced when changing the filter. With every new and fresh cartridge you also get new seals.
The connection between the VA-Standard head and the VA-Standard cartridge is realized using a bayonet lock. If the cartridge is under pressure, the connection snaps into the bayonet lock. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical blocking of the water supply on the VA-Standard head. If the VA-Standard cartridge is removed, two mechanical valves lock the water inlet and outlet in the VA-Standard head. This technology prevents water from leaking out of the VA-Standard head in an uncontrolled manner and causes damage to the water treatment system or the environment.
The VA-Standard cartridge system is modern, robust and safe. It is also perfect as a kit to realize your own water filter variations.
| Input connection: | 1/4" tube OD - John Guest Speedfit |
|---|---|
| Output connection: | 1/4" tube OD - John Guest Speedfit |
Login
Kartuschen
VA-Standard - Sediment-Filter, PP cartridge
€26.15*
Sediment filtration: The sediment filter removes coarse suspended solids, often caused by mechanical contamination. These coarse particles strain all further filter stages. Sediment filters are, therefore, ideal pre-filters. Filter properties: Filters dirt particles, sand, mud and rustFilters all particles larger than 5 µmConsists of pressed polypropylene fiberTemperature: min. 4 °C, max. 38 °CWorking pressure: min. 1,38 bar, max. 5,52 barFlow rate: 2.0 lFiltration capacity: approx. 3.500 lVA-Standard-Cartridge-SystemUsing a reliable and robust water filter cartridge system in water filters is essential. Often the pre-filters and post-filters in a water treatment system are the Achilles' heel, the so-called weak point, of the water filter. The filter cartridges must withstand pressure peaks of up to 50 bar, which can occur in the water pipes. At the same time, the cartridge must not burst or even pop out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard-Membrane-Cartridges are sealed using the rotation welding process, which achieves maximum strength.In addition, the membrane cartridge has seals, which do not need to be cleaned, checked or replaced when changing the filter. With every new membrane cartridge, you also receive new seals.The connection between the VA-Standard-Membrane-Head and the VA-Standard-Membran-Cartridge is established using a bayonet lock. If the cartridge is under pressure, the connection of the bayonet lock engages more firmly. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical lock of the water supply in the VA-Standard-Membrane-Head. Two mechanical valves lock the water inlet and outlet in the VA-Standard-Membrane-Head if the VA-Standard-Membrane-Cartridge is removed. This prevents water from running out of the VA-Standard-Membrane-Head in an uncontrolled manner and causing damage to the water treatment system or the environment.The VA-Standard-Cartridge-System is modern, robust and safe. It is also perfect as an assembly kit to realise your water filter variations.
VA Standard - Granulated Activated Carbon Filter, GAC Cartridge
€37.70*
Activated carbon filtration: Activated carbon filters remove pollutants such as dust, heavy metals and organic substances, odours, and tastes. During the service life of the activated carbon, the contaminants accumulate in the filter.Therefore, the replacement must take place at appropriate intervals. If no replacement takes place, the substances already absorbed may be released, which in turn causes additional water contamination. Filter properties:Activated carbon granulate made from 100% coconut shell.Filters dust, heavy metals, organic substances, odours and tastes.The activated carbon block can absorb more chlorine and other gases than activated carbon granules and is recommended when the tap water is polluted with chlorine, for example.Reduces chlorine odourTemperature: min. 4 °C, max. 38 °CWorking pressure: min. 1,38 bar, max. 5,52 barFlow rate: 1,89 lFiltration capacity: approx. 2.000 lVA-Standard-Cartridge-SystemUsing a reliable and robust water filter cartridge system in water filters is essential. Often the pre-filters and post-filters in a water treatment system are the Achilles' heel, the so-called weak point, of the water filter. The filter cartridges must withstand pressure peaks of up to 50 bar, which can occur in the water pipes. At the same time, the cartridge must not burst or even pop out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard-Membrane-Cartridges are sealed using the rotation welding process, which achieves maximum strength.In addition, the membrane cartridge has seals, which do not need to be cleaned, checked or replaced when changing the filter. With every new membrane cartridge, you also receive new seals.The connection between the VA-Standard-Membrane-Head and the VA-Standard-Membran-Cartridge is established using a bayonet lock. If the cartridge is under pressure, the connection of the bayonet lock engages more firmly. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical lock of the water supply in the VA-Standard-Membrane-Head. Two mechanical valves lock the water inlet and outlet in the VA-Standard-Membrane-Head if the VA-Standard-Membrane-Cartridge is removed. This prevents water from running out of the VA-Standard-Membrane-Head in an uncontrolled manner and causing damage to the water treatment system or the environment.The VA-Standard-Cartridge-System is modern, robust and safe. It is also perfect as an assembly kit to realise your water filter variations.
VA-Standard - Granulate Activated Carbon Filter + Mineralization, GAC+ Cartridge
€42.48*
Activated carbon filtration: Activated carbon filters remove pollutants such as dust, heavy metals and organic substances, as well as odours and tastes. In the course of the service life of the activated carbon, the pollutants accumulate in the filter.Therefore, replacement must take place at appropriate intervals. If no replacement takes place, the substances already absorbed may be released, which in turn causes additional contamination of water. Filter properties:Activated carbon granules made from 100% coconut shell.Filters dust, heavy metals, organic substances, odours and tastesEnriches water with vital minerals such as calcium and magnesiumReduction of inert gasesTemperature: min. 4 °C, max. 38 °COperating pressure: min. 1,38 bar, max. 5,52 barFlow rate: 1,89 lFiltration capacity: approx. 2.000 lVA-Standard-Cartridge-SystemUsing a reliable and robust water filter cartridge system in water filters is essential. Often the pre-filters and post-filters in a water treatment system are the Achilles' heel, the so-called weak point, of the water filter. The filter cartridges must withstand pressure peaks of up to 50 bar, which can occur in the water pipes. At the same time, the cartridge must not burst or even pop out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard-Membrane-Cartridges are sealed using the rotation welding process, which achieves maximum strength.In addition, the membrane cartridge has seals, which do not need to be cleaned, checked or replaced when changing the filter. With every new membrane cartridge, you also receive new seals.The connection between the VA-Standard-Membrane-Head and the VA-Standard-Membran-Cartridge is established using a bayonet lock. If the cartridge is under pressure, the connection of the bayonet lock engages more firmly. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical lock of the water supply in the VA-Standard-Membrane-Head. Two mechanical valves lock the water inlet and outlet in the VA-Standard-Membrane-Head if the VA-Standard-Membrane-Cartridge is removed. This prevents water from running out of the VA-Standard-Membrane-Head in an uncontrolled manner and causing damage to the water treatment system or the environment.The VA-Standard-Cartridge-System is modern, robust and safe. It is also perfect as an assembly kit to realise your water filter variations.
VA Standard - Activated Carbon Block Filter, CTO Cartridge
€39.95*
Activated carbon filtration: Activated carbon filters remove pollutants such as dust, heavy metals and organic substances, odours, and tastes. During the service life of the activated carbon, the contaminants accumulate in the filter.Therefore, the replacement must take place at appropriate intervals. If no replacement takes place, the substances already absorbed may be released, which in turn causes additional water contamination. Filter properties:Activated carbon block made from 100% coconut shell.Filters dust, heavy metals, organic substances, odours and tastes.The activated carbon block can absorb more chlorine and other gases than activated carbon granules and is recommended when the tap water is polluted with chlorine, for example.Reduces chlorine odourTemperature: min. 4 °C, max. 38 °CWorking pressure: min. 1,38 bar, max. 5,52 barFlow rate: 1,89 lFiltration capacity: approx. 2.000 lGranule density: 5 µm between the pressed pieces of activated carbonVA-Standard-Cartridge-SystemUsing a reliable and robust water filter cartridge system in water filters is essential. Often the pre-filters and post-filters in a water treatment system are the Achilles' heel, the so-called weak point, of the water filter. The filter cartridges must withstand pressure peaks of up to 50 bar, which can occur in the water pipes. At the same time, the cartridge must not burst or even pop out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard-Membrane-Cartridges are sealed using the rotation welding process, which achieves maximum strength.In addition, the membrane cartridge has seals, which do not need to be cleaned, checked or replaced when changing the filter. With every new membrane cartridge, you also receive new seals.The connection between the VA-Standard-Membrane-Head and the VA-Standard-Membran-Cartridge is established using a bayonet lock. If the cartridge is under pressure, the connection of the bayonet lock engages more firmly. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical lock of the water supply in the VA-Standard-Membrane-Head. Two mechanical valves lock the water inlet and outlet in the VA-Standard-Membrane-Head if the VA-Standard-Membrane-Cartridge is removed. This prevents water from running out of the VA-Standard-Membrane-Head in an uncontrolled manner and causing damage to the water treatment system or the environment.The VA-Standard-Cartridge-System is modern, robust and safe. It is also perfect as an assembly kit to realise your water filter variations.
VA Standard - Ultrafiltration Filter, UF Cartridge
€63.00*
Ultrafiltration: As a unique filtration process, ultrafiltration primarily retains microbiological contamination from the water. With a pore size of less than 0.1 µm, the ultrafiltration element is mainly used in the VISION AQUA® VA-Camping water filter for outdoor applications.Filter characteristics:Inlet water temperature: max. 45 °COperating pressure: 1,5 - 4 barflow rate: 2 - 3,5 l/minService life: max. 6 months (depending on the degree of contamination and continuous water loadVA-Standard-Cartridge-SystemUsing a reliable and robust water filter cartridge system in water filters is essential. Often the pre-filters and post-filters in a water treatment system are the Achilles' heel, the so-called weak point, of the water filter. The filter cartridges must withstand pressure peaks of up to 50 bar, which can occur in the water pipes. At the same time, the cartridge must not burst or even pop out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard-Membrane-Cartridges are sealed using the rotation welding process, which achieves maximum strength.In addition, the membrane cartridge has seals, which do not need to be cleaned, checked or replaced when changing the filter. With every new membrane cartridge, you also receive new seals.The connection between the VA-Standard-Membrane-Head and the VA-Standard-Membran-Cartridge is established using a bayonet lock. If the cartridge is under pressure, the connection of the bayonet lock engages more firmly. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical lock of the water supply in the VA-Standard-Membrane-Head. Two mechanical valves lock the water inlet and outlet in the VA-Standard-Membrane-Head if the VA-Standard-Membrane-Cartridge is removed. This prevents water from running out of the VA-Standard-Membrane-Head in an uncontrolled manner and causing damage to the water treatment system or the environment.The VA-Standard-Cartridge-System is modern, robust and safe. It is also perfect as an assembly kit to realise your water filter variations.
Accesories
Plug-in elbow connector - 1/4“ nozzle to 1/4“ tube OD - John Guest
€3.21*
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.
locking clip - 1/4“ tube OD - John Guest
€0.42*
Locking clip suitable for all 1/4" John Guest Speedfit connections. Properties: for drinking water applications and water treatment systems acetal copolymer (POM) mountable without tools quick, multiple release of the connection possible
Blind plug - 1/4" - Polyethylene - DMT EMEA GmbH
€0.61*
The blind plugs are mad of polyethylene approved for drinking water applications. They are ideally suited for closing connectors with a 1/4" tube OD watertight.
Plastic tube - 1/4", 6.35 mm - color: natural - John Guest
€1.49*
John Guest polyethylene hose/pipe, food grade, 1/4", 6.35x4.3mm, colour natural, max. 15 bar (at 20°C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and Co2)Other colours are available on request.
Plastic tube - 1/4", 6.35 mm - color: yellow - John Guest
€1.49*
John Guest polyethylene hose/pipe, food grade, 1/4", 6.35 x 4.3 mm, colour yellow, max. 15 bar (at 20 °C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and CO2)Other colours are available on request.
Plastic tube - 1/4", 6.35 mm - color: red - John Guest
€1.49*
John Guest polyethylene hose/pipe, food grade, 1/4", 6.35 x 4.3 mm, colour red, max. 15 bar (at 20 °C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and CO2)Other colours are available on request.
Similar products
VA-Quantum - Gehäusekopf mit 1/2" Innengewinde - Ersatzteil
€29.00*
Lieferumfang: 1 x VA-Quantum - Gehäusekopf mit 1/2" Innengewinde Der VA-Quantum Gehäusekopf wird in die entsprechende Wandhalterung vom Quantum Bindefilter eingeklemmt. Für einen einfachen Filterwechsel muss der Gehäusekopf inkl. Kartuschenzylinder nur nach oben geneigt und anschließend mit dem innovativen Push & Click-Verfahren gewechselt werden. Ein automatischer Wasserstopp im Gehäusekopf sorgt für einen trockenen Filterwechsel.
VA-Quantum - Gehäuse komplett mit 1/2" Innengewinde Anschluss
€59.50*
Mit dem Leergehäuse können Sie sich den Quantum Bindefilter so konfigurieren, wie Sie ihn benötigen. Ihnen stehen mehrere Filtereinsätze zur Verfügung, mit denen Sie den Quantum Bindefilter kombinieren können. Somit haben Sie für jede Trinkwassersituation immer den richtigen Filter.Der Kartuschen-Zylinder wird durch das innovative Push & Click-Verfahren geöffnet und wieder verschlossen. Ein automatischer Wasserstopp im System sorgt für einen trockenen Filterwechsel.
VA-Standard - Membrane head for 100 GPD membrane
€49.00*
VA-Standard-Cartridge System In water filtration it is very important to use a reliable and robust water filter cartridge system. Often, the pre- and post-filters are the Achilles' heel of a water treatment system, its weak point. The filter cartridges have to withstand pressure peaks of up to 50 bar that can occur in the water pipe. The cartridge must not burst or even jump out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard - cartridges are sealed using a rotary welding process, which results in maximum strength. In addition, each cartridge has its own seals, which do not have to be laboriously cleaned, checked or replaced when changing the filter. With every new and fresh cartridge you also get new seals.The connection between the VA-Standard head and the VA-Standard cartridge is realized using a bayonet lock. If the cartridge is under pressure, the connection snaps into the bayonet lock. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical blocking of the water supply on the VA-Standard head. If the VA-Standard cartridge is removed, two mechanical valves lock the water inlet and outlet in the VA-Standard head. This technology prevents water from leaking out of the VA-Standard head in an uncontrolled manner and causes damage to the water treatment system or the environment.The VA-Standard cartridge system is modern, robust and safe. It is also perfect as a kit to realize your own water filter variations.
VA-Standard - Membrane head for 500 GPD membrane
€69.00*
VA-Standard-Cartridge SystemIn water filtration it is very important to use a reliable and robust water filter cartridge system. Often, the pre- and post-filters are the Achilles' heel of a water treatment system, its weak point. The filter cartridges have to withstand pressure peaks of up to 50 bar that can occur in the water pipe. The cartridge must not burst or even jump out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard - cartridges are sealed using a rotary welding process, which results in maximum strength. In addition, each cartridge has its own seals, which do not have to be laboriously cleaned, checked or replaced when changing the filter. With every new and fresh cartridge you also get new seals.The connection between the VA-Standard head and the VA-Standard cartridge is realized using a bayonet lock. If the cartridge is under pressure, the connection snaps into the bayonet lock. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical blocking of the water supply on the VA-Standard head. If the VA-Standard cartridge is removed, two mechanical valves lock the water inlet and outlet in the VA-Standard head. This technology prevents water from leaking out of the VA-Standard head in an uncontrolled manner and causes damage to the water treatment system or the environment.The VA-Standard cartridge system is modern, robust and safe. It is also perfect as a kit to realize your own water filter variations.
Subscribe to our newsletter
Subscribe to our newsletter and always stay up to date!
You can unsubscribe from the newsletter at any time. You will find the unsubscribe link at the end of every newsletter message. Of course, your data is transmitted via a secure connection, treated confidentially, and not shared. Information about data processing can be found in our data protection declaration.
