VA-Standard - Membrane head for 100 GPD membrane

The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

Locking clip suitable for all 3/8" John Guest Speedfit connections. Properties: for drinking water applications and water treatment systems acetal copolymer (POM) mountable without tools quick, multiple release of the connection possible 

The blind plugs are mad of polyethylene approved for drinking water applications. They are ideally suited for closing connectors with a 1/4" tube OD watertight.

John Guest polyethylene hose/pipe, food grade, 1/4", 6.35x4.3mm, colour natural, max. 15 bar (at 20°C), Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and Co2)Other colours are available on request.

John Guest polyethylene hose/pipe, food grade, 1/4", 6.35x4.3mm, colour yellow, max. 15 bar (at 20°C), Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and Co2)Other colours are available on request.

John Guest polyethylene hose/pipe, food grade, 1/4", 6.35x4.3mm, colour red, max. 15 bar (at 20°C), Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and Co2)Other colours are available on request.

VA-Standard-Cartridge SystemIn water filtration it is very important to use a reliable and robust water filter cartridge system. Often, the pre- and post-filters are the Achilles' heel of a water treatment system, its weak point. The filter cartridges have to withstand pressure peaks of up to 50 bar that can occur in the water pipe. The cartridge must not burst or even jump out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard - cartridges are sealed using a rotary welding process, which results in maximum strength. In addition, each cartridge has its own seals, which do not have to be laboriously cleaned, checked or replaced when changing the filter. With every new and fresh cartridge you also get new seals.The connection between the VA-Standard head and the VA-Standard cartridge is realized using a bayonet lock. If the cartridge is under pressure, the connection snaps into the bayonet lock. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical blocking of the water supply on the VA-Standard head. If the VA-Standard cartridge is removed, two mechanical valves lock the water inlet and outlet in the VA-Standard head. This technology prevents water from leaking out of the VA-Standard head in an uncontrolled manner and causes damage to the water treatment system or the environment.The VA-Standard cartridge system is modern, robust and safe. It is also perfect as a kit to realize your own water filter variations.

500 GPD FILMTEC™ Reverse osmosis-Membranes FILMTEC™ reverse osmosis (RO) and nanofiltration (NF) elements are solutions for industrial, municipal, commercial and consumer water applications. These reverse osmosis membranes provide high retention of dissolved solids and organics and operate very efficiently at lower pressures.The 500 GPD FILMTEC™ reverse osmosis membranes also feature excellent structural strength and are more productive than other reverse osmosis membranes. These membranes are applied to demineralise brackish water or seawater desalination for various industries and applications, including industrial water treatment, power generation, food & beverage processing, municipal desalination and water reuse, and at-home drinking water devices.Features and functions:Material: TFC (DOW™ FILMTEC™)Input water temperature: max. 45 °COperating pressure: 5 - 6 barPermeate production: max. 78 l/hpH-range: 2 - 11Chlorine tolerance: < 0,1 ppmSeparation rate: 98%Filters up to approx. 1900 liters per day (500 gallons per day) Reduction of salinityRemoval of chemical impuritiesRecovery of ultra-pure waterPre-concentration of water streams upstream of evaporatorsReduction of wastewater volume by increasing water reuseTap water, brackish water2,5", 4", 8" membranesHighest retentionLow energy consumptionResistant to impuritiesTypical applications:Reverse osmosisDrinking waterUltra-pure waterProcess waterFood and beverage industryChemical processingMetal surface treatmentElectronicsNanofiltrationUltrafiltrationAll rights reserved by FILMTEC™VA-Standard-Cartridge-SystemUsing a reliable and robust water filter cartridge system in water filters is essential. Often the pre-filters and post-filters in a water treatment system are the Achilles' heel, the so-called weak point, of the water filter. The filter cartridges must withstand pressure peaks of up to 50 bar, which can occur in the water pipes. At the same time, the cartridge must not burst or even pop out of the cartridge head. In addition, the filter cartridge must ensure a high flow rate in connection with the filter medium used.The VA-Standard-Membrane-Cartridges are sealed using the rotation welding process, which achieves maximum strength.In addition, the membrane cartridge has seals, which do not need to be cleaned, checked or replaced when changing the filter. With every new membrane cartridge, you also receive new seals.The connection between the VA-Standard-Membrane-Head and the VA-Standard-Membran-Cartridge is established using a bayonet lock. If the cartridge is under pressure, the connection of the bayonet lock engages more firmly. This makes it almost impossible to loosen or open the connection under pressure. Another feature is the mechanical lock of the water supply in the VA-Standard-Membrane-Head. Two mechanical valves lock the water inlet and outlet in the VA-Standard-Membrane-Head if the VA-Standard-Membrane-Cartridge is removed. This prevents water from running out of the VA-Standard-Membrane-Head in an uncontrolled manner and causing damage to the water treatment system or the environment.The VA-Standard-Cartridge-System is modern, robust and safe. It is also perfect as an assembly kit to realise your water filter variations.