Category overview
Filter products
Electronic parts for reverse osmosis water filter
Here you will find all the necessary electronic components to optimally control and operate your reverse osmosis system. Our selection includes high-quality power supplies that ensure a stable power supply, as well as precise solenoid valves that automatically regulate water flow, making the operation more efficient and reliable. With these components, you can ensure that your water filtration system runs smoothly and consistently delivers fresh, filtered water.
Reliable Control and Maximum Efficiency
Modern reverse osmosis systems benefit from innovative electronic components that enhance both comfort and safety. Our pressure switches and sensors help monitor operating conditions and protect your system from potential damage caused by over- or under-pressure. The right electronics optimize the lifespan and performance of your water filtration system – whether for home use or industrial applications.

The pressure switch reacts to a pressure of 1 - 10 bar (maximum pressure can be adjusted stepless). The electrical contact is interrupted (opened) if the pressure is reached. It is a toggle pressure switch, which has the properties of an NC or an NO pressure switch, depending on the assignment (connection). Application is mainly in the ultrapure water segment (permeate), when, e.g. a tap is closed.Technical data:Switch type: toggle switchAdjustment range: 1 to 10 barConnection (for water pipe): 1/4" external threadOverpressure proof up to 300 barSwitching capacity: 4A, 250V Materials: body made of 1.4305 (stainless steel), seal and diaphragm made of FKMTemperature range: -5°C to +120°CSwitching differential: 10 - 30 %Protection class: IP 65 (terminals IP 00)Cable connection: 6.3 mm x 0.8 mm flat plug (cable lug)What is a pressure switch?In our case, we are talking about pressure switches that close or open an electrical connection at a certain predefined or set pressure (in this case, water pressure).What is an NC pressure switch?A pressure switch that keeps a connection closed in a pressureless state and opens it only under a certain pressure is called NC or carries this designation.NC stands for normally closed. These pressure switches are suitable for switching off, e.g. relays or pumps, when a certain pressure is reached.What is a NO pressure switch?A pressure switch that keeps a connection open in a pressureless state and only closes under a certain pressure is called NO or carries this designation.NO stands for normally open. These pressure switches are suitable, for example, for detecting whether a certain pressure is present to activate something else, e.g. info LED or another process.

MeanWell RSP-200 series industrial switching power supply.The RSP-200 series is a low profile moulded single output switching power supply for 1U, with high efficiency and free air convection cooling. This power supply is smaller in size but offers higher efficiency compared to similar products, making it ideal for users who want an economical operation, no noise, a small space requirement as well as low cost. The RSP-200 has an advanced high-performance circuit topology and comes with integrated power factor correction and up to 90% efficiency. This power supply offers protection against short circuits, overload, overvoltage and over temperature. The RSP-200 is ideal for applications such as industrial automation systems, industrial mechanical and electrical applications, instrumentation, LED displays, and any other system requiring 1U shallow installations.Features:Universal AC voltage inputIntegrated active PFC function, PF>0.95Protection against short circuits, overload, overvoltage and overtemperatureCooling by free air convectionLED signal lamp for operation indicationTechnical data:Output voltage: 48 V DCOutput voltage range: 41 - 56 VOutput current: 4.2 APower rating: 200 WRipple: 240 mVp-pInput voltage: 88 - 264VAC / 124 - 370VDCEfficiency: 90%Inrush current, max.: 20A/115VAC / 40A/230VACWorking temperature: -40 ... +85 °CSize: 215 x 115 x 30 mmWeight: 0.72 kg

Properties: Complies with railroad standards EN50155, EN45545-2 and IEC60571 Galvanic isolation of input and output Suitable for harsh and very dusty environments with high vibration and extreme temperatures Protection against short circuit, overload, overvoltage and overtemperature Technical data: Output voltage: 24 V DC Output current: 4.2 A Power: 100 W Ripple: 150 mVp-p Input voltage: 9.5 - 18VDC Efficiency: 84% Operating temperature: -15 °C to +60 °C

Properties: AC/DC 24V 3A power supply, power cord length: 120mm Input: 100-240V AC 50 / 60Hz, output 24V/DC; power up to maximum 72 Watt Dimensions: 14.5 x 8.2 x 6.8 cm Certifications: UL, GS, CE, FCC Shell material: ABS plastic housingProtection: short circuit protection, overheat protection, overvoltage protectionAC cable: EU plugAttention: The plug and power supply are not waterproof, for indoor use only.

RM Series Plastic Magnetic Valves The RM series of plastic magnetic valves has been specially designed to meet the ever-increasing demand for small micro-plastic magnetic valves. For manufacturers of plastic valves, it is nowadays impossible to offer water valves, pneumatic valves as well as magnetic gas valves, which can provide a flow rate of more than 70 l/min at a working pressure of 0.2 to 10 bar. These plastic magnetic valves are available as "normally closed" or "normally open". This magnetic valve operates in servo-controlled mode.Features:Normally open / normally closed / bistable2/2-way servo controlledMaterial valve body: Nylon 66, 30% glass fibre reinforcedMaterial membrane: NBR (buna)Ambient temperature: max. 40 °CFluid temperature: max. 60 °CWorking pressure: 0,2 to 10 barConnection: 3/8" tube external diameter John Guest SpeedfitPassage valve seat: Ø 10 mmFlow rate: 36 l/min at 1 bar, 52 l/min at 2 bar, 64 l/min at 3 bar, 75 l/min at 4 barVoltage: 24 VPower: 6,35 WElectrical connection: flat lug 6.3 x 0.8Applications:Industrial parts or dishwashersIndustrial freezers and cooling unitsIce cream / ice cube makersDrinking water dispensers and drinking water coolersHigh and low-pressure coffee machinesWater inlet and outlet for many non-abrasive mediaIrrigation and steam atomisers

RM Series Plastic Magnetic Valves The RM series of plastic magnetic valves has been specially designed to meet the ever-increasing demand for small micro-plastic magnetic valves. For manufacturers of plastic valves, it is nowadays impossible to offer water valves, pneumatic valves as well as magnetic gas valves, which can provide a flow rate of more than 70 l/min at a working pressure of 0.2 to 10 bar. These plastic magnetic valves are available as "normally closed" or "normally open". This magnetic valve operates in servo-controlled mode.Features:Normally open / normally closed / bistable2/2-way servo controlledMaterial valve body: Nylon 66, 30% glass fibre reinforcedMaterial membrane: NBR (buna)Ambient temperature: max. 40 °CFluid temperature: max. 60 °CWorking pressure: 0,2 to 10 barConnection: 3/8" tube external diameter John Guest SpeedfitPassage valve seat: Ø 10 mmFlow rate: 36 l/min at 1 bar, 52 l/min at 2 bar, 64 l/min at 3 bar, 75 l/min at 4 barVoltage: 220-240 VPower: 6,67 VAElectrical connection: flat lug 6.3 x 0.8Applications:Industrial parts or dishwashersIndustrial freezers and cooling unitsIce cream / ice cube makersDrinking water dispensers and drinking water coolersHigh and low-pressure coffee machinesWater inlet and outlet for many non-abrasive mediaIrrigation and steam atomisers

This magnetic valve is normally closed (NC = normally closed) when no power is applied and is used in reverse osmosis systems and other water filters. Features: Normally closed Material body: POM plastic Material membrane: NBR Working pressure: 0 to 7 bar Opening: 2,5 mm Fluid temperature: -10 ... +80 °C Connection: 1/4" tube external diameter John Guest Speedfit Voltage: 230 V

This pressure switch reacts to a pressure of 2 - 4.5 bar. The electrical contact is interrupted (opened) if this pressure is reached. It is an NC pressure switch. Application is mainly in the ultra-pure water segment (permeate), when, e.g. the tap is closed.Technical data: Switch type: NC contactConnection (for water pipe): 1/4" tube outer diameterSwitching capacity: 0.6A 125VDC, 0.3A 250VDC,Cable connection: 4.8mm x 0.8mm flat plug (cable socket)What is a pressure switch?In our case, we are talking about pressure switches that close or open an electrical connection at a certain predefined or set pressure (in this case, water pressure).What is an NC pressure switch?A pressure switch that keeps a connection closed in a pressureless state and opens it only under a certain pressure is called NC or carries this designation.NC stands for normally closed. These pressure switches are suitable for switching off, e.g. relays or pumps, when a certain pressure is reached.What is a NO pressure switch?A pressure switch that keeps a connection open in a depressurised state and closes only under a certain pressure is called NO or carries this designation.NO stands for normally open. These pressure switches are suitable, e.g. for recognising whether a certain pressure is present to activate something else, e.g. an info LED or another process.In addition, there are toggle pressure switches, which can also be NO or NC, depending on the assignment (connection).

Typ: beleuchtet Nennstrom: 10 A Anschluss: Löten Nennspannung: 250 V/AC Voreilender Kontakt (PE): Ja Farbe: schwarz Gesamtpolzahl: 2 + PE Bauform: Stecker, Einbau vertikal Kategorie: Kaltgeräte-Steckverbinder Produkt-Art: Kaltgeräte-Steckverbinder Herstellerfarbe: Schwarz Temperaturbereich: 70 °C Gerätestecker-Norm (IEC 60320): C14 Inhalt: 1 St. Polzahl: 2 Hersteller-Nr.: 501638 EAN: 4016138324730

Properties: Plug: Type J (3-pin, partially insulated) to C13 90° angled. Colour: black Length: 1,80m Cross section: 3 x 0,75mm² Material: H05VV-F Approval: SEV RoHS compliant Packing: Bulk Countries: Liechtenstein, Rwanda, Switzerland Plug type J (YP-46) The system, also called type 13 in Switzerland, is usually used with 220-230 V AC, 50 Hz. Plug C13 (YC-12L)IEC 60320-C13 plug is used for the power connection of devices which do not generate heat during operation. The maximum temperature of the plug must not exceed 70°C, and the maximum current flow is set to 10A. Cold appliance plugs do not fit into warm or hot appliance sockets.

This pressure switch reacts to a pressure of 0 - 0.5 bar. If this pressure is reached, the electrical contact is closed. It is a normally open (NO) pressure switch. Application is mainly in the water supply to detect the input pressure in front of the device.Technical data: Switch type: NO contactConnection (for water pipe): 1/4" tube outer diameterSwitching capacity: 0.6A 125VDC, 0.3A 250VDC,Cable connection: 4.8mm x 0.8mm flat plug (cable socket)What is a pressure switch?In our case, we are talking about pressure switches that close or open an electrical connection at a certain predefined or set pressure (in this case, water pressure).What is an NC pressure switch?A pressure switch that keeps a connection closed in a pressureless state and opens it only under a certain pressure is called NC or carries this designation.NC stands for normally closed. These pressure switches are suitable for switching off, e.g. relays or pumps, when a certain pressure is reached.What is a NO pressure switch?A pressure switch that keeps a connection open in a depressurised state and closes only under a certain pressure is called NO or carries this designation.NO stands for normally open. These pressure switches are suitable, e.g. for recognising whether a certain pressure is present to activate something else, e.g. an info LED or another process.In addition, there are toggle pressure switches, which can be NO or NC, depending on the assignment (connection).

Properties: Plug: CEE 7/7 grounded safety plug E+F 90° angled to C13 90° angled. Colour: black Length: 1,80m Cross section: 3 x 0,75mm² Material: H05VV-F Approval: VDE, NF, DEMKO, FINKO, KEMA, CEBEC, OVE, IMQ, SEV, SAA RoHS compliant Packing: Bulk Countries: Afghanistan, Algeria, Andorra, Austria, Belgium, Bosnia-Herzegovina, Bulgaria, Croatia, Czech Republic, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Indonesia, Latvia, Lithuania, Luxembourg, Macedonia, Moldova, Monaco, Montenegro, Morocco, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, South Korea, Spain, Sweden, Tunisia, Ukraine There is no official standard in Syria and Turkey, but the grounded safety plug is commonly used. Plug type E+F CEE-7/7 system (YP-22)In the grounded safety plug, two protection systems were combined in one plug,so that the grounding occurs via the contact surfaces or the grounding trunnion (French system). Plug C13 90° angled (YC-12L)IEC 60320-C13 cold appliance plug is used for power connection of devices which do not generate heat during operation. The maximum temperature of the plug must not exceed 70°C, and the maximum current flow is fixed at 10A. Cold appliance plugs do not fit into warm or hot appliance sockets.
Subscribe to our newsletter
Subscribe to our newsletter and always stay up to date!
You can unsubscribe from the newsletter at any time. You will find the unsubscribe link at the end of every newsletter message. Of course, your data is transmitted via a secure connection, treated confidentially, and not shared. Information about data processing can be found in our data protection declaration.

