Safety and care products for VISION AQUA^® water filters

The HYDRO-STOPPER is a reliable and electronically controlled shut-off valve, which is small and easy to install by any user. Thanks to a unique technical solution for detecting a water leak and the shutoff system, the valve can be operated with a single 1.5 V alkaline battery AA LR6 or a lithium battery L91 AA. The system consumes power (0.45 A) only during activation (0.01 s) of the water shut-off mechanism. In stand-by mode, the electronic valve control is supplied with a practically non-measurable current of less than 1 nA. Consequently, it can be assumed that there is no current consumption in stand-by mode. With an L91 AA lithium battery, the standby time can exceed 10 years.Features:Water pressure (maximum) 1.0 MPa = 10 bar (tested up to 15 bar).Valve inlet 3/4" inner threadValve outlet 3/4" male threadFlow rate: 25 l/min at 4 barMaterial: Polyamide 6.6, 30 % glass fibre reinforced Power supply: one alkaline battery LR6 1.5V (AA) or lithium battery L91 1.5V (AA)Power consumption: stand-by mode: no consumption (<1nA) Power off: 400mA in 0.01s Battery should be changed before its expiry dateCable length: 2 x 2.0 mApplications:Washing machinesDishwashersReverse osmosis filter systemsWater dispensersCoffee machinesMachines that automatically draw water from the water supply system

Features: For sealing threaded connections Resistant to all aggressive fluids No sticking and swelling thus prevents seizing of threads Dimensions: width = 12mm, length = 12m, thickness = 0,08mm Weight per unit area: 25 g/m² Material: polytetrafluoroethylene Temperature resistance: -240 to 240 °C Pressure: max. 25 bar The alignment of the threaded connection is permitted, including limited reverse turning.NoteSince temperature and pressure are interdependent, simultaneous stressing with the maximum values is impossible. Furthermore, the specifications depend on the respective medium. Therefore, due to many possible applications, these specifications can only serve as a guideline (see also DVGW approval).

Features: For sealing threaded connections Resistant to all aggressive fluidsNo sticking and swelling thus prevent seizing of the threads Suitable for coarse threads DN 12 - DN 50Dimensions: width = 12mm, length = 12m, thickness = 0,1mm Weight per unit area: 100 g/m² Material: polytetrafluoroethylene Temperature resistance: -240 to 240 °C Pressure: max. 25 bar The alignment of the threaded connection is permitted, including limited reverse turning.NoteSince temperature and pressure are interdependent, simultaneous stressing with the maximum values is impossible. Furthermore, the specifications depend on the respective medium. Therefore, due to many possible applications, these specifications can only serve as a guideline (see also DVGW approval).

Features: For sealing threaded connections Resistant to all aggressive fluidsNo sticking and swelling thus prevent seizing of the threads Suitable for fine threads max. DN 10Dimensions: width = 12mm, length = 12m, thickness = 0,1mm Weight per unit area: 60 g/m² Material: polytetrafluoroethylene Temperature resistance: -240 to 240 °C Pressure: max. 25 bar The alignment of the threaded connection is permitted, including limited reverse turning.NoteSince temperature and pressure are interdependent, simultaneous stressing with the maximum values is impossible. Furthermore, the specifications depend on the respective medium. Therefore, due to many possible applications, these specifications can only serve as a guideline (see also DVGW approval).