Skip to main content

Water Connection Manager

Product information "Water Connection Manager"

Properties: 
  • Material: aluminum powder-coated in white 
  • Thickness: 2mm 
  • large through hole: Ø 20.5 mm (3 each on the short side, 5 each on the long side) 
  • small through hole: Ø 17.5 mm (2 on each side) 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Zubehör

Plastic tube - 3/8", 9.5 mm - colour: blue - John Guest
John Guest polyethylene hose/pipe, food grade, 3/8", 9.5 x 6.3 mm, colour blue, max. 15 bar (at 20 °C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and CO2)Other colours are available on request.

€2.19*
Plastic tube - 3/8", 9.5 mm - colour: natural - John Guest
John Guest polyethylene hose/pipe, food grade, 3/8", 9.5x6.3mm, colour natural, max. 15 bar (at 20°C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and Co2)Other colours are available on request.

€2.19*
Plastic tube - 1/4", 6.35 mm - color: natural - John Guest
John Guest polyethylene hose/pipe, food grade, 1/4", 6.35x4.3mm, colour natural, max. 15 bar (at 20°C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and Co2)Other colours are available on request.

€1.49*
Plastic tube - 1/4", 6.35 mm - color: red - John Guest
John Guest polyethylene hose/pipe, food grade, 1/4", 6.35 x 4.3 mm, colour red, max. 15 bar (at 20 °C),Approvals for drinking water: DVGW worksheet W270, KTW, NSF, WRAS and FDA The plastic tubes made of polyethylene by John Guest have proven themselves for years in numerous fields of application.They are particularly resistant to pressure and temperature, vibration, corrosion, ageing and impact resistant, and are lightweight.They are ideal for John Guest quick-connect fittings and fluid and air applications.For potable water systems, approvals are available following DVGW worksheet W270, KTW, NSF and WRAS, complying with DIN 2001 specifications.Other properties:Plastic tube made of polyethylene (LLDPE)Approval according to DWGW, KTW, NSF, WRAS and FDAPressure resistance: up to 15 bar; please refer to the datasheetSuitable for food, drinking water and water treatment applicationsSuitable for vacuum applicationsGood for use with air, non-flammable gases like (e.g. N2 and CO2)Other colours are available on request.

€1.49*
Shut-off valve - 1/4“ tube OD - John Guest
Shut-off valves for fluid applications made of polypropylene (PP)John Guest shut-off valves are made of white polypropylene (PP) and are equipped with food-safe EPDM O-rings. They have been developed in accordance with the food guidelines for use with drinking water. If you use other drinkable liquids, please contact us.The shut-off valves are not suitable for compressed air, explosive gases, petroleum or other liquids as well as in heating systems or similar areas of application.Important note on using the JG shut-off valves and service valvesThe JG shut-off valves have been developed to enable the temporary maintenance of downstream components / assemblies. They may only be used in the "completely closed" or "completely open" settings.The shut-off valves must not be used as follows:as flow control (only partially open)as a permanent pipe end (here we recommend using our end caps.)only connected on one sideas a tap or faucet

€10.86*
Shut-off valve - 3/8“ tube OD - John Guest
Shut-off valves for fluid applications made of polypropylene (PP)John Guest shut-off valves are made of white polypropylene (PP) and are equipped with food-safe EPDM O-rings. They have been developed in accordance with the food guidelines for use with drinking water. If you use other drinkable liquids, please contact us.The shut-off valves are not suitable for compressed air, explosive gases, petroleum or other liquids as well as in heating systems or similar areas of application.Important note on using the JG shut-off valves and service valvesThe JG shut-off valves have been developed to enable the temporary maintenance of downstream components / assemblies. They may only be used in the "completely closed" or "completely open" settings.The shut-off valves must not be used as follows:as flow control (only partially open)as a permanent pipe end (here we recommend using our end caps.)only connected on one sideas a tap or faucet

€11.50*
Elbow connector - 1/4“ tube OD - John Guest
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

€3.57*
Elbow connector - 3/8“ tube OD - John Guest
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

€5.24*
T-Connector - 2 x 1/4" tube OD in 90° to 1/4" nozzle - John Guest
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

€2.67*
T-Connector 2 x 3/8" tube OD to 3/8" nozzle - John Guest
The PP series for imperial tube dimensions is made from white polypropylen (PP) plastic and is equipped with food-safe EPDM O-rings.The product range was developed for drinking water applications, water treatment systems etc.Properties:     for drinking water applications and water treatment systems     Polypropylene (PP)     mountable without tools     fast, repeated disconnection possible     very good flow propertiesThe product range is not suitable for compressed air, explosive gases, petroleum or other liquids as well as in heating systems or similar areas of application.

€2.94*
Plug-in elbow connector - 1/4“ nozzle to 1/4“ tube OD - John Guest
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

€3.21*
Plug-in elbow connector - 3/8“ nozzle to 3/8“ tube OD - John Guest
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

€5.56*
Bulkhead - 1/4“ tube OD - John Guest
The PP series for imperial tube dimensions is made from white polypropylen (PP) plastic and is equipped with food-safe EPDM O-rings.The product range was developed for drinking water applications, water treatment systems etc.Properties:     for drinking water applications and water treatment systems     Polypropylene (PP)     mountable without tools     fast, repeated disconnection possible     very good flow propertiesThe product range is not suitable for compressed air, explosive gases, petroleum or other liquids as well as in heating systems or similar areas of application.

€5.18*
Bulkhead - 3/8“ tube OD - John Guest
The PP series for imperial tube dimensions is made from white polypropylen (PP) plastic and is equipped with food-safe EPDM O-rings.The product range was developed for drinking water applications, water treatment systems etc.Properties:     for drinking water applications and water treatment systems     Polypropylene (PP)     mountable without tools     fast, repeated disconnection possible     very good flow propertiesThe product range is not suitable for compressed air, explosive gases, petroleum or other liquids as well as in heating systems or similar areas of application.

€6.97*
T-Connector - 2 x 1/4" tube OD in 180° to 1/4" nozzle - John Guest
The CI range is manufactured from white acetal copolymer (POM) and fitted with food grade EPDM O-rings. They are used specifically in water treatment, drinking water and beverage applications. They are also suitable for other liquids and are recommended in the given technical specification for alternating cold and hot water applications.Properties:simple and quick installation "right first time"ideal for compressed air and liquidsmountable without toolsfast, multiple disconnection possiblevery good flow propertiesThe product series is not suitable for use in compressed air and vacuum areas.

€2.80*

Subscribe to our newsletter

Subscribe to our newsletter and always stay up to date!

You can unsubscribe from the newsletter at any time. You will find the unsubscribe link at the end of every newsletter message. Of course, your data is transmitted via a secure connection, treated confidentially, and not shared. Information about data processing can be found in our data protection declaration.

VISION AQUA Reverse Osmosis Systems and Water Filter Shipping Information and Payment Methods