Durchflussbegrenzer - 250 ccm - 1/4" Rohr AD
€5.99*
Content:
1 Stück
Available, delivery time: 3 - 5 Werktage
Product number:
1000327
EAN:
4260645520905
Manufacturer no.:
1000327
Weight:
0.01 kg
Length:
74 mm
Height:
15.5 mm
Width:
15.5 mm
Product information "Durchflussbegrenzer - 250 ccm - 1/4" Rohr AD"
Der Durchflussbegrenzer ist ein unverzichtbares Bauteil in jedem Umkehrosmose Wasserfilter.
Erst durch den Durchflussbegrenzer findet der Prozess der Umkehrosmose in einer Membran statt.
Der Durchflussbegrenzer, auch als Fester-Druckregler bezeichnet, sorgt dafür, dass eine gewisse Menge an Abwasser (Retentat) aus der Umkehrosmose-Membran innerhalb einer bestimmten Zeit abfließen kann. Erst dadurch kann sich der osmotische Druck aufbauen.
So bedeutet z.B. die Aufschrift FLOW 250, dass der Durchflussbegrenzer bei ca. 6 - 8 bar Betriebsdruck der Umkehrosmose Membran (osmotische Druck, Innendruck) eine Wassermenge von ca. 250 Milliliter pro Minute relativ konstant (Abhängig vom Staudruck) durchlässt.
Zusätzlich wird durch die Wahl des passenden Durchflussbegrenzers auch das Reinstwasser (Permeat) zu Abwasserverhältnis bestimmt. Da bei den VISION AQUA Wasserfiltern zusätzlich die GREENOSMO® TECHNOLOGY eingesetzt wird, können auch Durchflussbegrenzer eingesetzt werden die den üblichen Vorgaben an Reinstwasser zu Abwasserverhältnis nicht mehr entsprechen.
So erreichen die VISION AQUA Wasserfilter mit Umkehrosmose ein Verhältnis von 1:0,8, was im Klartext bedeutet, für 1 Liter Reinstwasser benötigt der VISION AQUA Wasserfilter mit Umkehrosmose ca. 1,8 Liter Rohwasser.
Erst durch den Durchflussbegrenzer findet der Prozess der Umkehrosmose in einer Membran statt.
Der Durchflussbegrenzer, auch als Fester-Druckregler bezeichnet, sorgt dafür, dass eine gewisse Menge an Abwasser (Retentat) aus der Umkehrosmose-Membran innerhalb einer bestimmten Zeit abfließen kann. Erst dadurch kann sich der osmotische Druck aufbauen.
So bedeutet z.B. die Aufschrift FLOW 250, dass der Durchflussbegrenzer bei ca. 6 - 8 bar Betriebsdruck der Umkehrosmose Membran (osmotische Druck, Innendruck) eine Wassermenge von ca. 250 Milliliter pro Minute relativ konstant (Abhängig vom Staudruck) durchlässt.
Zusätzlich wird durch die Wahl des passenden Durchflussbegrenzers auch das Reinstwasser (Permeat) zu Abwasserverhältnis bestimmt. Da bei den VISION AQUA Wasserfiltern zusätzlich die GREENOSMO® TECHNOLOGY eingesetzt wird, können auch Durchflussbegrenzer eingesetzt werden die den üblichen Vorgaben an Reinstwasser zu Abwasserverhältnis nicht mehr entsprechen.
So erreichen die VISION AQUA Wasserfilter mit Umkehrosmose ein Verhältnis von 1:0,8, was im Klartext bedeutet, für 1 Liter Reinstwasser benötigt der VISION AQUA Wasserfilter mit Umkehrosmose ca. 1,8 Liter Rohwasser.
| Connection A: | 1/4" tube OD - John Guest Speedfit |
|---|---|
| Connection B: | 1/4" tube OD - John Guest Speedfit |
Login
Zubehör
Clamping and releasing aid - John Guest
€12.30*
Simplifies the tightening and loosening of the John Guest connectors. Suitable for the following connector sizes: 3/16" 1/4" 5/16" (8mm) 3/8" 1/2"
locking clip - 1/4“ tube OD - John Guest
€0.42*
Locking clip suitable for all 1/4" John Guest Speedfit connections. Properties: for drinking water applications and water treatment systems acetal copolymer (POM) mountable without tools quick, multiple release of the connection possible
Blind plug - 1/4" - Polyethylene - DMT EMEA GmbH
€0.61*
The blind plugs are mad of polyethylene approved for drinking water applications. They are ideally suited for closing connectors with a 1/4" tube OD watertight.
Ähnliche Artikel
Flow limiter - 300 ccm - 1/4" tube external diameter
€5.99*
The flow limiter is an indispensable component in every reverse osmosis water filter. Only through the flow limiter, the process of reverse osmosis takes place in a membrane. The flow limiter, also known as a fixed pressure regulator, ensures that a certain amount of wastewater (retentate) can flow out of the reverse osmosis membrane within a certain time. Only then can the osmotic pressure build-up. For example, the inscription FLOW 300 means that at approx. 6 - 8 bar operating pressure of the reverse osmosis membrane (osmotic pressure, internal pressure), the flow limiter lets through a water quantity of approx. 300 millilitres per minute relatively constantly (depending on the back pressure).In addition, selecting the appropriate flow restrictor also determines the ultrapure water (permeate) to wastewater ratio. Since the VISION AQUA water filters are additionally equipped with the GREENOSMO® TECHNOLOGY, flow limiters can also be used, which do not comply with the usual specifications for ultra-pure water to wastewater ratio.Thus, the VISION AQUA water filters with reverse osmosis achieve a ratio of 1:0.8, which in plain language means that for 1 litre of ultra-pure water, the VISION AQUA water filter with reverse osmosis requires approx. 1.8 litres of raw water.
Flow limiter- 400 ccm - 1/4" tube external diameter
€5.99*
The flow limiter is an indispensable component in every reverse osmosis water filter. Only through the flow limiter, the process of reverse osmosis takes place in a membrane. The flow limiter, also known as a fixed pressure regulator, ensures that a certain amount of wastewater (retentate) can flow out of the reverse osmosis membrane within a certain time. Only then can the osmotic pressure build-up. For example, the inscription FLOW 400 means that at approx. 6 - 8 bar operating pressure of the reverse osmosis membrane (osmotic pressure, internal pressure), the flow limiter lets through a water quantity of approx. 400 millilitres per minute relatively constantly (depending on the back pressure).In addition, selecting the appropriate flow restrictor also determines the ultrapure water (permeate) to wastewater ratio. Since the VISION AQUA water filters are additionally equipped with the GREENOSMO® TECHNOLOGY, flow limiters can also be used, which do not comply with the usual specifications for ultra-pure water to wastewater ratio.Thus, the VISION AQUA water filters with reverse osmosis achieve a ratio of 1:0.8, which in plain language means that for 1 litre of ultra-pure water, the VISION AQUA water filter with reverse osmosis requires approx. 1.8 litres of raw water.
Flow limiter - 420 ccm - 1/4" tube external diameter
€5.99*
The flow limiter is an indispensable component in every reverse osmosis water filter. Only through the flow limiter, the process of reverse osmosis takes place in a membrane. The flow limiter, also known as a fixed pressure regulator, ensures that a certain amount of wastewater (retentate) can flow out of the reverse osmosis membrane within a certain time. Only then can the osmotic pressure build-up. For example, the inscription FLOW 420 means that at approx. 6 - 8 bar operating pressure of the reverse osmosis membrane (osmotic pressure, internal pressure), the flow limiter lets through a water quantity of approx. 420 millilitres per minute relatively constantly (depending on the back pressure).In addition, selecting the appropriate flow restrictor also determines the ultrapure water (permeate) to wastewater ratio. Since the VISION AQUA water filters are additionally equipped with the GREENOSMO® TECHNOLOGY, flow limiters can also be used, which do not comply with the usual specifications for ultra-pure water to wastewater ratio.Thus, the VISION AQUA water filters with reverse osmosis achieve a ratio of 1:0.8, which in plain language means that for 1 litre of ultra-pure water, the VISION AQUA water filter with reverse osmosis requires approx. 1.8 litres of raw water.
Flow limiter - 600 ccm - 1/4" tube external diameter
€5.99*
The flow limiter is an indispensable component in every reverse osmosis water filter. Only through the flow limiter, the process of reverse osmosis takes place in a membrane. The flow limiter, also known as a fixed pressure regulator, ensures that a certain amount of wastewater (retentate) can flow out of the reverse osmosis membrane within a certain time. Only then can the osmotic pressure build-up. For example, the inscription FLOW 600 means that at approx. 6 - 8 bar operating pressure of the reverse osmosis membrane (osmotic pressure, internal pressure), the flow limiter lets through a water quantity of approx. 600 millilitres per minute relatively constantly (depending on the back pressure).In addition, selecting the appropriate flow restrictor also determines the ultrapure water (permeate) to wastewater ratio. Since the VISION AQUA water filters are additionally equipped with the GREENOSMO® TECHNOLOGY, flow limiters can also be used, which do not comply with the usual specifications for ultra-pure water to wastewater ratio.Thus, the VISION AQUA water filters with reverse osmosis achieve a ratio of 1:0.8, which in plain language means that for 1 litre of ultra-pure water, the VISION AQUA water filter with reverse osmosis requires approx. 1.8 litres of raw water.
Flow limiter - 700 ccm - 1/4" tube external diameter
€5.99*
The flow limiter is an indispensable component in every reverse osmosis water filter. Only through the flow limiter, the process of reverse osmosis takes place in a membrane. The flow limiter, also known as a fixed pressure regulator, ensures that a certain amount of wastewater (retentate) can flow out of the reverse osmosis membrane within a certain time. Only then can the osmotic pressure build-up. For example, the inscription FLOW 700 means that at approx. 6 - 8 bar operating pressure of the reverse osmosis membrane (osmotic pressure, internal pressure), the flow limiter lets through a water quantity of approx. 700 millilitres per minute relatively constantly (depending on the back pressure).In addition, selecting the appropriate flow restrictor also determines the ultrapure water (permeate) to wastewater ratio. Since the VISION AQUA water filters are additionally equipped with the GREENOSMO® TECHNOLOGY, flow limiters can also be used, which do not comply with the usual specifications for ultra-pure water to wastewater ratio.Thus, the VISION AQUA water filters with reverse osmosis achieve a ratio of 1:0.8, which in plain language means that for 1 litre of ultra-pure water, the VISION AQUA water filter with reverse osmosis requires approx. 1.8 litres of raw water.
Flow limiter - 1200 ccm - 1/4" tube external diameter
€5.99*
The flow limiter is an indispensable component in every reverse osmosis water filter. Only through the flow limiter, the process of reverse osmosis takes place in a membrane. The flow limiter, also known as a fixed pressure regulator, ensures that a certain amount of wastewater (retentate) can flow out of the reverse osmosis membrane within a certain time. Only then can the osmotic pressure build-up. For example, the inscription FLOW 1200 means that at approx. 6 - 8 bar operating pressure of the reverse osmosis membrane (osmotic pressure, internal pressure), the flow limiter lets through a water quantity of approx. 1200 millilitres per minute relatively constantly (depending on the back pressure).In addition, selecting the appropriate flow restrictor also determines the ultrapure water (permeate) to wastewater ratio. Since the VISION AQUA water filters are additionally equipped with the GREENOSMO® TECHNOLOGY, flow limiters can also be used, which do not comply with the usual specifications for ultra-pure water to wastewater ratio.Thus, the VISION AQUA water filters with reverse osmosis achieve a ratio of 1:0.8, which in plain language means that for 1 litre of ultra-pure water, the VISION AQUA water filter with reverse osmosis requires approx. 1.8 litres of raw water.
Subscribe to our newsletter
Subscribe to our newsletter and always stay up to date!
You can unsubscribe from the newsletter at any time. You will find the unsubscribe link at the end of every newsletter message. Of course, your data is transmitted via a secure connection, treated confidentially, and not shared. Information about data processing can be found in our data protection declaration.
